Finally! For you DIY sabersmiths, a chance to construct your own GCS Creed saber. This kit contains the Creed body, pommel, and Optic holder/heatsink. NO ELECTRONICS ARE INCLUDED. With the list of parts below, you will be able to build your own version of my popular design.

 

 

DIY parts required

Battery Holder

https://www.thecustomsabershop.com/Electronics/Batteries-and-Packs/Holders-/18650-Single-Cell-Holder

Covertec wheel
https://www.thecustomsabershop.com/Wiring-Hardware/Covertec/Black-machined-button-for-Covertec-clip

28 mm Speaker
https://www.thecustomsabershop.com/Electronics/Speakers/28mm-Speakers

Speaker/battery holder/sound board chassis
https://www.thecustomsabershop.com/Wiring-Hardware/Speaker-Mounts/MHSv1-speaker-mount-Style-6-For-28mm-Speakers

Set screw to hold optic can and collar
https://www.thecustomsabershop.com/Wiring-Hardware/Screws/8-32-Thread/8-32-x-38-Set-Screw-

O-ring
https://www.thecustomsabershop.com/Wiring-Hardware/O-Rings/1-316-ID-Black-O-ring-

Pommel insert and c-clip
https://www.thecustomsabershop.com/Modular-Hilt-System-V1/Pommel-Inserts

LED/optic holder for pixel

https://www.thecustomsabershop.com/Non-MHS/Blade-Holders-non-MHS/Heatsink-module-for-1-ID-tubes-with-center-hole

Pixel adapter

https://www.thecustomsabershop.com/Blades/Pixel-Blades/Pixel-Blade-Components/TCSS-Style-Connector/Pixel-Hilt-Side-LED-Module-Adapter

6mm tactile switches (2)

https://mou.sr/4gCkQmY

Switch caps
https://mou.sr/4g7Jw6R

https://mou.sr/4oJRnte

Will also need:

• a blade screw 8-32

• 6-32 x 1/8″ set screw to hold heatsink to optic can

• 8-32 x 3/16″ socket head screw for covertec wheel

 

Comments are closed.